Lattice Semiconductor mVision AR0234, User Manual

Page: 6 / 25

Lattice mVision AR0234 Sensor Board
User Guide
© 2021-2022 Lattice Semiconductor Corp. All Lattice trademarks, registered trademarks, patents, and disclaimers are as listed at www.latticesemi.com/legal .
All other brand or product names are trademarks or registered trademarks of their respective holders. The specifications and information herein are subject to change without notice.
6 FPGA-UG-02124-1.1
1. Introduction
The Lattice mVision™ AR0234CS sensor board uses a 1/2.6−inch 2.3 Mp Color 0deg Global Shutter CMOS digital image
sensor with an active−pixel array of 1920 (H) × 1200 (V) from On Semiconductor. The sensor board can be interfaced to
the EVDK (Embedded Vision Development Kit). The EVDK combines the bridging capability of our CrossLink™ FPGA, the
low-power, small form factor ECP5™ and the high-resolution benefits of our HDMI ASSP, onto this modular platform
enabling flexible connectivity and energy efficient image processing for robotics, drones, ADAS, smart surveillance and
AR/VR systems. The included software provides a comprehensive setup interface and flexibility to evaluate the Lattice
mVision ISP solution from Lattice and full sensor features and capabilities.
The sensor board comes with a lens suitable for evaluation with M12 lens holder to use standard M12 compatible
lenses. You can use your own lens as long as it is compatible with the mechanical and optical requirements.
An IR-CUT driver circuit using TI’s DRV8838 integrated motor driver solution for cameras allows the use of IR-CUT filter.
1.1. Features
The key features of the Lattice mVision AR0234CS sensor board are:

ON Semiconductor CMOS ½.
6
”, Color, 0deg, Image Sensor AR02345CS with following specifications:

Active pixels: 1920H × 1200V

Pixel size: 3.0 um × 3.0 um

Color sensor

Interface: MIPI output

Global Shutter

Part#: AR0234CS3C00SUKA0-CP-E

IR_CUR driver circuit for use of IR_CUT filters

Included PT-0620 lens with following specifications:

Focal Length: 6.0 mm

Iris: F2.0

Mount: M12x0.5

Image Sensor Size: 1/3"

Angle of View: 51°

Housing: Metal

Optics: Glass

M12 lens holder

External connection for Flash and Shutter control

External connection for all power supplies

External connection for EVDK kit (including power, data, and control signals)

Tripod Connection