Lattice Semiconductor MachX05-NX Page 56 User Manual Download | Manualshive

Page: 56 / 63

background image

MachXO5-NX Development Board

Evaluation Board User Guide

© 2022 Lattice Semiconductor Corp. All Lattice trademarks, registered trademarks, patents, and disclaimers are as listed at

www.latticesemi.com/legal

All other brand or product names are trademarks or registered trademarks of their respective holders. The specifications and information herein are subject to change without notice.

56

FPGA-EB-02052-1.0

Appendix C. User Defined Preference File Listing

// These names follow the MachXO5™-NX Development Board schematic but,
// they may be defined by the user. Thus, they can be copied into the
// preference file and edited to match a different naming convention if
// needed or used to fill in the Spreadsheet view.

// MachXO5-25 LED Connections
// Note: The following order matches the LED locations on the board
// from top D1 to bottom D8
ldc_set_location -site {R3} [get_ports {LED[0]}]
ldc_set_location -site {R2} [get_ports {LED[1]}]
ldc_set_location -site {R1} [get_ports {LED[2]}]
ldc_set_location -site {P7} [get_ports {LED[3]}]
ldc_set_location -site {H12} [get_ports {LED[4]}]
ldc_set_location -site {H11} [get_ports {LED[5]}]
ldc_set_location -site {G13} [get_ports {LED[6]}]
ldc_set_location -site {G12} [get_ports {LED[7]}]

//DIP Switch Connections
ldc_set_location -site {T1} [get_ports {DIPSW[0]}]
ldc_set_location -site {T2} [get_ports {DIPSW[1]}]
ldc_set_location -site {T3} [get_ports {DIPSW[2]}]
ldc_set_location -site {T4} [get_ports {DIPSW[3]}]

//Push Button Connections
ldc_set_location -site {E19} [get_ports PB1]
ldc_set_location -site {F20} [get_ports PB2]
ldc_set_location -site {B7} [get_ports PB3]
ldc_set_location -site {G20} [get_ports PB4]

//Clock inputs
ldc_set_location -site {E14} [get_ports CLK_12MHz]
ldc_set_location -site {T7} [get_ports CLK_25MHz]
ldc_set_location -site {B1}  [get_ports CLK_27MHz]
ldc_set_location -site {V1}  [get_ports CLK_125MHz]
ldc_set_location -site {D19} [get_ports CLK_EXT]

//SEG LED Connections
ldc_set_location -site {A18} [get_ports SEG_LED_DP]
ldc_set_location -site {A17} [get_ports SEG_LED_G]
ldc_set_location -site {A16} [get_ports SEG_LED_F]
ldc_set_location -site {A15} [get_ports SEG_LED_E]
ldc_set_location -site {F11} [get_ports SEG_LED_D]
ldc_set_location -site {E15} [get_ports SEG_LED_C]
ldc_set_location -site {G11} [get_ports SEG_LED_B]
ldc_set_location -site {F14} [get_ports SEG_LED_A]

//HyperRAM
ldc_set_location -site {D2} [get_ports ram0_1_rst]
ldc_set_location -site {J2} [get_ports ram0_ck_p]
ldc_set_location -site {J1} [get_ports ram0_ck_n]
ldc_set_location -site {J3} [get_ports ram0_cs]
ldc_set_location -site {H1} [get_ports ram0_dq0]
ldc_set_location -site {H2} [get_ports ram0_dq1]
ldc_set_location -site {J4} [get_ports ram0_dq2]
ldc_set_location -site {J5} [get_ports ram0_dq3]

«
...
54
55
56
57
58
...
»

Summary of Contents for MachX05-NX
































































Reviews:

No comments

Related manuals for MachX05-NX

Brand: IBM Pages: 357

Brand: Gan Systems Pages: 24

Brand: Ampro Pages: 72

RTKA223012DR0050BU

Brand: Renesas Pages: 14

VECTOR 1 MOTHERBOARD

Brand: Vector Graphic Pages: 14

Brand: ECS Pages: 64

Brand: Gigabyte Pages: 96

880GM-LE - V1.0

Brand: ASROCK Pages: 60

Brand: Avalue Technology Pages: 79

GA-H170M-HD3 DDR3

Brand: Gigabyte Pages: 44

Brand: Sleipner Pages: 28

Brand: EVGA Pages: 2

Brand: ASROCK Pages: 35

STEALTH 54LB/48

Brand: Watersnake Pages: 52

Brand: DFI Pages: 24

lanparty dk P45 series

Brand: DFI Pages: 112

LanParty UT NF4 SLI EXPERT Venus

Brand: DFI Pages: 161

bq51010BEVM-764

Brand: Texas Instruments Pages: 26

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands