Lattice Semiconductor CrossLink-NX ISP Demo, Quick Start Manual

Page: 10 / 18

Lattice CrossLink-NX ISP Demo Quick Start Guide
Application Note
© 2021 Lattice Semiconductor Corp. All Lattice trademarks, registered trademarks, patents, and disclaimers are as listed at www.latticesemi.com/legal .
All other brand or product names are trademarks or registered trademarks of their respective holders. The specifications and information herein are subject to change without notice.
10 FPGA-AN-02040-1.0
Figure 5.3 CrossLink-NX Board Programming Status and Result
7. Start Diamond Programmer, Version 3.10 or a later version. By default, the Create a new project from a JTAG scan
option is selected. Check and confirm other settings are correctly reflected the real components connected
( Figure 5.4 ) . Click OK, if everything is correct.
Figure 5.4 Getting Started dialog in Lattice Diamond Programmer
8. Make sure the configuration settings for the ECP5 Board are the same as those shown in Figure 5.5 .
Device Family: ECP5UM Device: LFE5UM-85F
Operation: Fast Program
File Name: \\rel_mvision\V2.0\Bitstream\ECP5_ISP_bridge_impl1.bit
...