background image

Motor boat  LATREX 335                                                                                                        SIA   LATREX

 

9/14 

gas  down  again.  Never  give  full  speed  with  a  cold  engine,  the  engine  must  be 
warmed-up first. 
 
If  you  shift  into  forward  or  reverse  gear,  make  sure  that  you  do  not  accelerate. 
Changing gears at more than 1000 rpm can damage the boat, the engine and the 
transmission. 
While turning off the engine please pay attention to the following: 
- Change the gear lever into neutral position. 
- Turn back the ignition key into middle position. 
 

Important points during the first 25 hours of operation :( see motor manual) 
 

The first 25 hours of operation are the most important during the operation of an 
engine.  Take  account  of  the  following  points  in  order  to  ensure  the  best 
performance of the engine: 
During the first 10 hours the engine must not be operating over a longer period at 
less  than  1500  rpm.  During  the  first  hours,  shift  into  gear  as  soon  as  possible 
after ignition. Do not go at constant speed over a longer period of time! 
In the first 10 hours of operation, never exceed 75% of the full power. Go only for 
short periods of time at full speed (max. 5 minutes at a time). 
Never accelerate to full speed with a cold engine. 
Before  charging  the  engine  fully,  it  must  have  reached  a  sufficient  operating 
temperature. 
 
FIRST  INSPECTION after 25 hours of operation : 
 
This inspection will be carried out by your engine dealer. The necessary checks 
are  carried  out  and,  if  necessary,  additional  adjustments  are  done  at  engine, 
electronics and transmission. 
 
Changes of engine oil and oil filter 
Checking of injection 
Adjusting of the engine 
Checking the switchboard cable 
Checking the different liquid levels 
Checking for leaks in the fuel system 
Checking for leaks in the cooling system 
Checking the battery cables and connections: is there still enough distilled water? 
 
We recommend the use of engine oil as described in the different engine 
manuals. The oil 
level of the engine should be checked regularly. 
 
SAFETY  ADVICE : 
 

Summary of Contents for 335















Reviews: