background image

MSA Latchways

®

 

Vertical Device

 

LadderLatch, TowerLatch, TowerLatch SP and Climblatch 

                                                                                                 

18 

Latchways, an MSA Company.   

13. Appendix 1. 

 

Additional information relating to the use of Latchways ClimbLatch devices 
on guided type vertical fall arrest systems in conformance with EN353 -
1:2014/prA1:2017. 

 

When using the Latchways Climblatch device on an inclined or vertical system the arrow on the 
device  label  and  the  red  slipper  pad  must  always  be  pointing  towards  the  highest  point  of  the 
system.  Under no circumstances must the device be used the other way around.  

 

 

User Instructions

  

 

On a vertical system - connect the Latchways ClimbLatch device via the karabiner to the chest attachment point 
of the harness. 

Entry to the system is identical whether for a vertical, inclined or horizontal system.  Hold the cam link in the 
position shown in Fig1. This will ensure the cable grip cam is held in the open position.  Unscrew the thimble on 
the entry gate and slide the thimble away.  

 

 

Up 

Summary of Contents for Latchways Climblatch




















Reviews: