latch LC9368-HTV, Installation Manual

Page: 15 / 17

Camera Installation Guide Version 1.0 28 29
Features
• H.264, H.265 compression technology
• 30 fps @ 1920x1080 (WDR Pro on)
• 2.8~12 mm, remote focus
• SNV (Supreme Night Visibility) for low light conditions
• WDR Pro for unparalleled visibility in extremely bright and dark environments
• Built-in IR illuminators, effective up to 100 feet (30 meters)
• Weather-proof IP66-rated and vandal-proof IK10-rated housing
• Built-in MicroSD/SDHC/SDXC card slot for on-board storage
• Built-in microphone
System Information
• Model: LC9368-HTV
• CPU: Multimedia SoC (system-on-chip)
• Flash: 128MB
• RAM: 256MB
• Storage: 256GB SD card
General
• Connectors: RJ-45 cable connector for 10/100 Mpbs network/PoE connection
• LED Indicator: System power and status indicator
• Power Input: IEEE 802.3af PoE Class 0
• Power Consumption: Max. 12.95 W (IR on), Max. 9 W (IR off))
• Dimensions: 5.3” x 4.1” in inches
• Weight: 819 g
• Safety Certifications: CE, FCC Class B, UL
• Operating Temperature:
• Humidity: 90%
• Warranty: 12 months
Specifications
Starting temperature: 14°F - 140°F (-10°C - 60°C)
Working temperature: -22°F - 140°F (-30°C - 60°C)
If the camera does not operate:
•
•
Troubleshooting
Make sure the camera is connected to power. The LED light will light Red if power is on.
Make sure the LED light is Green to ensure the network is connected. For LED Definitions,
see below.
LED Status
Item
Description
Powered and system booting,
or network failed
Connected to network
Upgrading firmware
Restoring defaults
Status after a reset (network
connected)
Status after a reset (network
disconnected)
Power off
Network is disconnected
Steady Red
Steady Red and Green LED blinks
every 1 sec.
Green LED blinks every 1 sec.
and Red LED blinks consecutively
every 0.15 sec.
Green and Red blink every 0.15
sec, Green and Red light on, then
blink again.
Red LED is on, Green LED blinks
and Red LED is constantly on.
Green and Red LEDs are
constantly on.
1.
2.
3.
4.
5.
6.
Red LED off
Green LED off