manualshive.com logo in svg

Lastec 621EFH, Owner'S Manual

Share
Download
Lastec 621EFH Owner'S Manual Download Page 26

Initial Set-Up

Mounting The Articulator To The Tractor

3

3-2

Lastec//021819

Initial Set-Up

3.1

Mounting The Articulator To The Tractor

DANGER!

Before attempting to mount the Articulator to the tractor, be sure the PTO is disen-
gaged, then engine is off, the parking break set, and the transmission is in neutral.

Follow the procedures listed below to properly mount the Articulator to the tractor:

1.

Park the tractor on level ground.

2.

Turn off the tractor, disengage the PTO, shift the transmission into neutral, and set the 
parking brake. Remove the key from the tractor start switch.

3.

Leave the Articulator in transport position, with the safety latch in place. DO NOT LOWER 
THE ARTICULATOR INTO CUTTING POSITION AT THIS TIME.

4.

Position the Articulator next to the traction unit as shown below. 

5.

Install the hydraulic lines and hydraulic motor hoses to the Articulator and the traction 
unit.

6.

Verify that the hydraulic pressure and speed limits on the traction unit are correct and can 
be used with the hydraulic motor on the Articulator. 

7.

Start the tractor, making sure no personnel are near the articulator.

8.

Check if the hydraulic motor rotation is clockwise. Switch the hydraulic motor hoses if the 

Danger

EFH009

Summary of Contents for 621EFH

















































Reviews:

No comments

Brands by name

Popular brands

Load more brands