Lastec 100EFK, Owner'S Manual

Page: 41 / 54

Operating Procedures
Preparation For Cutting
Operating Procedures Lastec//021819 4-4
4
4.3 Preparation For Cutting
Danger
Caution
Warning
DANGER!

Always follow all safety rules stated in this manual and in your drive unit manual. A
well-informed, safety-conscience operator is the best safeguard against accidents
or injuries.

Never allow extended running of any engine indoors! Exhaust gasses contain car-
bon-monoxide, and can be fatal.
WARNING!

Never attempt to operate the Articulator until you have read and understood this
manual and your drive unit manual in their entirety!
CAUTION!

Always perform the preoperation equipment inspection before attempting to operate
the Articulator.

Always perform the appropriate maintenance schedule(s) before attempting to
operate the Articulator.
The Articulator is designed specifically for finish mowing applications. One of the unique
benefits of the Articulator's cutting system is its ability to float over contours that are
impossible for other wide-area mowers to cut accurately. The Articulator offers a high
level of maneuverability.
Although the Articulator is an industrial-quality mower, do not attempt to use it to cut
extremely long grass or areas heavy with brush or debris.
Before operating the Articulator, you must read and completely understand this manual
as well as the drive unit manual. In addition, you must also complete the appropriate
maintenance schedules and perform a complete pre-operating checklist.

Complete the Initial Set-Up section of this manual BEFORE attempting to operate
the Articulator.

After transporting to the work area, remove the deck safety cables and lower the
Articulator into cutting position.

Be sure the Articulator is not positioned over any debris or loose objects.