Last Chance Archery Ultra Lock Adapter Product Warnings And Instructions Download Page 4

Page: 4 / 4

LAST CHANCE ARCHERY, LLC

619 Hubert Pittman Rd

Pendergrass, GA 30567

Customer Service: 706-654-1961

or [email protected]

Step #5. Once your ULA brackets are securely attached to your

press. You can press the bow by putting the limbs inside the left

adapter first (A). This will make the bow easier to manage while

you then fit the bow into the right adapter (B) using the press

wheel or actuating press motor (D). Move the press in slowly as

to insure proper fit and alignment (as shown in steps A,B,C,D).

Step #6. Note that the ULA rollers are supposed to touch the

limbs of the bow when being pressed. These rollers are

designed and engineered to touch the limb precisely to

lock the bow into place once pressure is applied (C).

Summary of Contents for Ultra Lock Adapter

Page 1: ...Ultra Lock Adapter Product warnings and instructions Parts Included Left bracket Right Bracket...

Page 2: ...presses and will not be warrantied for use on any other press The Ultra Lock Adapter is designed and tested for pressing the Hoyt Ultra Flex Limb system only Using the ULA on any other bow types will...

Page 3: ...r Ultra Lock Adapter set to avoid injuries or damage to your bow Step 3 Take the right bracket of your ULA set and attach it onto the LCA finger block as shown in steps A B C Step 4 Take the left brac...

Page 4: ...rst A This will make the bow easier to manage while you then fit the bow into the right adapter B using the press wheel or actuating press motor D Move the press in slowly as to insure proper fit and...