Page 05
3 - Setting Up Your Machine
3.1 - Loose Items Inventory
Please remove and inspect the following items:
3.2 - Accessories Warning
USE RECOMMENDED ACCESSORIES. Only use accessories approved by a Lassco-Wizer. The use of improper acces-
sories may cause risk of injury to persons.
FM4-4007: Side Stop Screws (4)
FM4-4006: Paper Side Stops (2)
EZ-114A: Table Assemlby (1)
EBM-32: Chuck Re-
lease Key (1)
SPIN-EZE: Drill Bit
Lubricant (1)
Hollow Drill Bit (1)
(these items may be
installed)
EZ-1016: Pattern Bars (set of 5)
HEX-332: Hex Wrench
3/32” (1)
EBM2-1034: 25” Drill Strip (1)
HEX-18: Hex Wrench
1/8” (1)
CC-2: Chip Clearer (1)
EBM2-1048: Chip
Bag (1)
EZ-1014: Table Stop (1)
EZ-1028: Clamp Bracket (1)
and FM7-7005: 1/4” Knob (1)
EZ-115A: Back-gauge (1)
50-35: 5/16”-18 Elastic
Stop Nut (1)
1/4” Lock Washers (2)
10-32 Elastic Stop Nuts (2)
EBM-76: Black Fiber
Washer (1)
