Setting Up Your Machine
Page 06
Your Spinnit Paper Drill is now ready for use. With proper operation and
maintenence, it will give you trouble free operation for years.
Electrical Start Up
Making sure nothing is interfering with the drill bit,
plug the cord set into a grounded 115V outlet. To
turn the machine on, press the Rocker Switch located
on the upper left hand side of the shroud.
Step #7
Power Cord
Rocker Switch
Chip Bag
Attach the Chip Bag (EBM2-1048) as shown by stretching
the open end over the top hook of the Chip Chute (EBM2-
110A). Continue fitting it around the entire edge of the Chip
Chute making sure it is snug.
Step #4
Note:
Be sure to empty the Chip Bag regularly as needed. Failure to
empty the Chip Bag can result in clogging of the Chip Chute.
