NO TOC CD-RW
AUTO TRACK
PHONO AUX
TAPE
-dB 30 12 6 3 0 OVER
L+R
TR
NO TOC CD-RW
AUTO TRACK
PHONO AUX
TAPE
-dB 30 12 6 3 0 OVER
L+R
TR
Recording
Audio from the PHONO, TAPE or AUX sources can be recorded on the CD recorder.
1. To record a record, select PHONO.
2. Record an external source, press the AUX button and connected the cable to the AUX IN
jacks at the back, Select AUX.
3.
4. Load a recordable CD-R or CD-RW disc into the unit.
To record the cassette tape.
A. Select the more of track number assignment with Track Increment.
The unit will record the next track when you press the TRACK INCREMENT button every
time. Maybe the current track doesn't finish the recording, but if you press the TRACK
INCREMENT button, the unit will record the next track.
B. Select tracks automatically division assignment with AUTO MANUAL.
If you are busy, select tracks automatically division assignment with AUTO MANUAL button,
when the sound level has dropped below the -20db/-30db/-40db (record signal) for more
than 2 seconds, the current track will automatically stop, and record another one. And you
only can set a sort of record signal every time.
TRACK INCREMENT
The unit doesn't divide tracks.
5.
Press the RECORD button,“REC” and ( ) will appear on the display.
?
No button will work while “busy” is displayed. Wait a few seconds until “busy”
disappear from the display.
26
27
NO TOC CD-RW
AUTO TRACK
REC
PHONO AUX
TAPE
-dB 30 12 6 3 0 OVER
L+R
TR
NO TOC CD-RW
AUTO TRACK
PHONO AUX
TAPE
-dB 30 12 6 3 0 OVER
L+R
TR
About CD-R and CD-RW discs
CD-R discs can be recorded once only. Once they have been used for recoding, they cannot
be erased or re-recorded. However, if space is available on the disc (and the disc has not
been finalized), additional material can be recorded.
By contrast, a CD-RW disc can be used in much the same way as a CD-R disc, but the last
track or tracks recorded can be erased, and the space on the disc can be re-used for other
recordings.
However, you should note that an audio CD created using a CD-RW disc may not play back
satisfactorily on every audio CD-player.
CD-R, by contrast, may be played satisfactorily on the majority of audio CD players.
Press the OPEN/CLOSE button( ), place a disc on the disc tray with the printed
label side up, and then press the OPEN/CLOSE button( ) to close the disc tray.
NOTE:Make sure “NO TOC” and “CD-R”(or “CD-RW') indicators lights on the display, or the
RECORD function will not work.
The display will show “Busy CD” and the disc is reading, waiting until the reading is
complete before next step.
1. Load Cassette Tape into the unit (located on side of the unit) Playback will
automatically begin.
2. Press button halfway to Fast Forward the Tape. Press button lightly and playback will
resume.
3. Press button all the way to end playback and eject Tape.
8
2
3
4
6
5
A
B
