Rev. A 10/17
2
T48331ES
Rev. A 10/17
7
T48331ES
IMPORTANT SAFETY INFORMATION
When using electrical appliances, basic precautions should always be followed to reduce
the risk of fire, electrical shock and injury to persons, including the following:
Read all instructions before using this Fan.
TO REDUCE THE RISK OF FIRE, ELECTRICAL SHOCK OR PERSONAL INJURY, ALWAYS
FOLLOW THESE IMPORTANT SAFETY INSTRUCTIONS AND WARNINGS:
DO NOT
use this fan to ventilate areas where flammable liquids or vapors are used, stored or are present, including paints,
gasoline, varnishes, floor refinishing products or solvents. ALWAYS read and follow all warnings and instructions on the con
tainers for these products!
ALWAYS
be sure the plug fits tightly into the outlet. When plugs fit loosely into outlets, they may slip partially out of the
outlet and create a poor connection. This may cause outlets to overheat and create a potential fire hazard. Outlets in this
condition should be replaced by a qualified electrician.
ALWAYS
unplug the power cord when servicing, cleaning or moving the Fan. DO NOT use the ON/OFF switch as the sole
means of disconnecting power. NEVER leave children unattended when the Fan is on or plugged in. ALWAYS turn off and
unplug the Fan when not in use.
BE CERTAIN
that the power source for the Fan is 120V AC. DO NOT plug the Fan into 240V or other power source.
The
Blue Plug™
on your Lasko fan is a safety feature. It contains a non-replaceable safety device (fuse) that should not be
removed or tampered with. To reduce the risk of fire, electric shock and personal injury,
DO NOT
attempt to remove, replace,
repair or tamper with the originally supplied plug. If the Fan has stopped functioning, it may be due to the safety device incor-
porated in this plug. Call 800-233-0268, Monday - Friday, between 8:00 a.m. and 5:00 p.m. Eastern for questions. If the plug
warning label is missing or damaged, call the toll free number for a replacement label.
THIS FAN HAS A POLARIZED PLUG
(one blade is wider than the other). This plug is designed to fit into the outlet only one
way. Match the wide blade to wide slot in outlet and FULLY INSERT. DO NOT attempt to bypass or defeat this safety feature.
If the plug does not fit in the outlet, consult a qualified electrician. The outlet may need to be replaced.
•
AVOID
the use of extension cords, power strips, power taps, outlet style air fresheners or other cord connected device, as these
devices may overheat and cause a fire hazard.
•
DO NOT
route power cord under rugs, carpets, runners or furniture. This may damage the cord or cause it to overheat creating a fire
hazard.
•
ALWAYS
place the Fan on a stable, flat, level surface while in operation to prevent the Fan from overturning.
•
NEVER
insert or allow fingers or objects to enter grill openings while Fan is in operation or injury and/or damage to the Fan may occur.
•
DO NOT
block, cover or obstruct air flow to or from the fan while in operation.
•
DO NOT
use this Fan outdoors or near water or wet locations such as a bath tub, pool or hot tub. Use of this Fan in a wet location
may create a shock hazard.
•
DO NOT
route power cord in or through areas such as doorways or where the cord may be damaged or create a
tripping hazard.
•
NEVER
use a single extension cord to operate more than one Fan or other electrical device.
•
DO NOT
use this Fan in a window. Rain may create an electrical hazard.
•
DO NOT
use this Fan if it has been damaged or is not functioning properly.
•
DO NOT
operate any fan with a damaged cord or plug. Discard fan.
•
THIS FAN DOES NOT MEET THE REQUIREMENTS OF NEC ARTICLE 547-7 (2008)
.This Fan is not suitable for use in agricultural
facilities including areas where livestock, poultry or other animals are confined. Please refer to National Electric Code (NEC) Article
547-7 (2008), or applicable state or local codes or standards relating to electrical requirements for agricultural buildings.
•
THIS FAN DOES NOT MEET THE REQUIREMENTS OF NEC ARTICLE 500 (2008)
.This Fan is not suitable for use in hazardous
locations. Please refer to National Electric Code (NEC) Article 500 or applicable state or local codes or standards relating to electrical
requirements for hazardous locations.
NOTICE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This
equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particu-
lar installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient
or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet
on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.
The user is cautioned that changes and modifications made to the equipment without the approval of manufacturer could void the
user’s authority to operate this equipment.
CAUTION
HERRAMIENTAS NECESARIAS PARA EL ARMADO (no incluida)
- Destornillador de Cabeza Phillips # 2
ARMADO
1. Para facilitar el armado, recueste el Ventilador de modo que la
parrilla negra y el tablero de control den hacia arriba.
2. Arme las Mitades de la Base de Apoyo encastrando las Puntas de
la Base de Apoyo A con los Orificios para Puntas en la Base de
Apoyo B. Asegure (2) #8 X 3/8" Tornillos en los dos orificios externos
en la parte inferior de la Base. (Figura 1)
3. Conecte el Cable Eléctrico a través del orificio grande en el centro
de la Montura de la Base de Apoyo. (Figura 2
4.
Alinee la Montura de la Base de Apoyo con la Base del Motor,
teniendo en cuenta que la ranura del cable en la parte inferior
de la montura de la base de apoyo debe apuntar hacia la parte
posterior del Ventilador. Adose la Montura de la Base de Apoyo a
la Base del Motor con Tornillos Largos M5 de 1/2". Cerciórese de
alinear la Llave del Conjunto de la Base de Soporte con la Muesca
Localizadora de la Base Del Motor. (Figura 1) Suavemente tire del
Cable Eléctrico para evitar que quede flojo y colóquelo en el Orificio
de Colocación del Cable. (Figura 3)
Copas
Figura 1
Conjunto de la
Base de Soporte
Figura 2
M5 X 1/2" Tornillos
Cable Eléctrico
Figura 3
#8 X 3/8"
Tornillos
Canal Conductor de Cable
Conjunto de la
Base de Soporte
Base de Soporte B
Base de Soporte A
Cable Eléctrico
Botón de Encendido/Apagado
Botón de Ionizante
Botón Temporizador
Botón de Velocidad
Botón de Oscilación
Figura 5
CONTROL REMOTO
1. Instale la baterías (no suministró) como mostrado en la Figura 4.
La batería es el tipo “AAA”.
2. No mezcle baterías viejas y nuevas. No mezcle baterías alca-
linas, estándar (carbono-
cinc o recargables (níquel-cadmio).
3. No se deshága de baterías en el fuego. baterías pueden estallar
o pueden salirse.
FUNCIONAMIENTO
Este Ventilador puede hacerse funcionar mediante los Controles
Manuales ubicados en la parte superior de la unidad o con el
Control Remoto (se muestra en la Figura 4).
1.
Coloque el ventilador sobre una superficie firme y nivelada.
2.
Conecte el cable eléctrico a un tomacorriente de 120 voltios.
3.
Conecte la energía eléctrica a su ventilador pulsando el Botón Ali-
mentación ( ).
4.
VELOCIDAD DEL VENTILADOR: Ahora puede ajustar la velocidad
del ventilador al nivel deseado - (1), (2), (3) ó (4) - pulsando el
Botón Velocidad ( ).
5.
OSCILACIÓN: Oprima el Botón de Oscilación ( ) para activar y
desactivar la función de oscilación.
6.
FUNCIÓN DE TEMPORIZADOR: Este ventilador está equipado
con un temporizador. El temporizador puede ser programado 1
hora a 8 horas. Continúe oprimiendo el Botón Temporizador (
) para lograr el tiempo de programación deseado. Para cancelar
el temporizador, presione el botón del temporizador hasta que
se apague la luz.
7.
IONIZANTE: La Función Ionizante de este Ventilador funcionará
con cualquier modo de velocidad. Oprima el Botón de Ionizante
( )
una vez para activar esta función y una segunda vez para
desactivarla. El Ventilador deberá estar ENCENDIDO para que
el Ionizante pueda funcionar. Cuando el Ionizante se encuentra
activado, esto ayudará a purificar el aire de la habitación.
8.
Después de apagar el Ventilador, desconecte la unidad del toma-
corriente eléctrico.
TIMER
POWER
OSC
SPEED
LOUVERS
TIMER
POWER
OSC
SPEED
IONIZER
Figure 4
Botón Temporizador
Botón Alimentación
Botón Velocidad
Baterías
AAA
Oscilación Botón
Ionizante Botón
#8 X 3/8"
Tornillos
