New 9/13
2
T12110ES
New 9/13
7
T12110ES
MODELO T12110
FUNCIONAMIENTO
(Figuras 1 y 2)
1. Cuidadosamente
retire el Ventilador de la bolsa plástica
y la caja.
2. Coloque el ventilador sobre una superficie firme y
nivelada.
Los tacos de plástico o hule, tales como las patas de esta
unidad, pueden pegarse a la superficie de los muebles.
La unidad podría dejar un residuo capaz de oscurecer,
manchar o dejar marcas permanentes en el acabado de
ciertas superficies de muebles, incluyendo superficies y
pisos de madera.
3. Conecte el cable eléctrico a un tomacorriente de 120
voltios.
Asegúrese que el enchufe encaje firmemente en el
tomacorriente.
Cuando los enchufes quedan flojos en los
tomacorrientes, pueden deslizarse parcial
o completamente fuera del tomacorriente
con un leve movimiento del cable adosado.
Los tomacorrientes en este estado podrían
sobrecalentarse y representar un grave peligro
de incendio; si está cubierto por una cortina o
tela, el riesgo de incendio es aún mayor.
4. Encienda el Ventilador oprimiendo el
Botón De Encendido
( ).
Botón De Encendido
se iluminará cuando el equipo
haya sido encendido.
5. Al encender el Ventilador, el equipo estará funcionando
en ALTO.
6. Si oprime el
Botón De Encendido
por segunda vez, el
Ventilador quedará en MEDIANO.
7. Si oprime el
Botón De Encendido
por tercera vez, el
Ventilador quedará en BAJO.
8. Para APAGAR el Ventilador, oprima el Botón de Encendido/
Apagado ( ). La luz de encendido se apagará una vez
que el equipo esté apagado.
9. Después de apagar el Ventilador, desconecte la unidad
del tomacorriente eléctrico.
Figura 1
Botón De
Encendido
Botón De
Oscilación
FUNCIÓN DE OSCILACIÓN:
Esta función podrá ser activada
con cualquier velocidad del Ventilador. Si oprime el
Botón De
Oscilación
(
), permitirá que el Ventilador oscile en ambas
direcciones. Para detener la oscilación, oprima el
Botón De
Oscilación
una vez más.
Botón De Oscilación
se iluminará
cuando esta función se encuentre activada.
INSTRUCCIONES MULTIDIRECCIONALES
(Figura 2)
La mitad superior del Ventilador puede orientarse en una dirección
diferente a la de la mitad inferior del mismo. La función de
oscilación podrá activarse con el ventilador enfrentando cualquier
dirección.
1. Sostenga la
Base
y la
Parte Inferior De Ventilador
en forma
estacionaria.
2. Tome la
Parte Superior De Ventilador
y gírela a la posición que
desee.
ADVERTENCIA:
NO INTENTE HACER GIRAR EL VENTILADOR
MÁS ALLÁ DE SU PUNTO DE RESISTENCIA, PUES ELLO
DAÑARÁ EL VENTILADOR.
Figura 2
Base
Parte Inferior
De Ventilador
Parte Superior
De Ventilador
IMPORTANT SAFETY INFORMATION
When using electrical appliances, basic precautions should always be fol lowed to re duce
the risk of fire, electrical shock and injury to per sons, including the following:
Read all instructions before using this Fan.
TO REDUCE THE RISK OF FIRE, ELECTRICAL SHOCK OR PERSONAL INJURY, ALWAYS
FOLLOW THESE IMPORTANT SAFETY INSTRUCTIONS AND WARNINGS:
DO NOT
use this fan to ventilate areas where flammable liquids or vapors are used, stored or are present, including paints,
gasoline, varnishes, floor refinishing products or solvents. ALWAYS read and follow all warnings and instructions on the
containers for these products!
ALWAYS
be sure the plug fits tightly into the outlet. When plugs fit loosely into outlets, they may slip partially out of the
outlet and create a poor connection. This may cause outlets to overheat and create a potential fire hazard. Outlets in this
condition should be replaced by a qualified electrician.
ALWAYS
unplug the power cord when servicing, cleaning or moving the Fan. DO NOT use the ON/OFF switch as the sole
means of disconnecting power. NEVER leave children unattended when the Fan is on or plugged in. ALWAYS turn off and
unplug the Fan when not in use.
BE CERTAIN
that the power source for the Fan is 120V AC. DO NOT plug the Fan into 240V or other power source.
The
Plug
on your Lasko fan is a safety feature. It contains a non-replaceable safety device (fuse) that should not be removed
or tampered with. To reduce the risk of fire, electric shock and personal injury,
DO NOT
attempt to remove, replace, repair or
tamper with the originally supplied plug. If the Fan has stopped functioning, it may be due to the safety device incorporated
in this plug.
THIS FAN HAS A POLARIZED PLUG
(one blade is wider than the other). This plug is designed to fit into the outlet
only one way. Match the wide blade to wide slot in outlet and FULLY INSERT. DO NOT attempt to bypass or defeat this safety
feature. If the plug does not fit in the outlet, consult a qualified electrician. The outlet may need to be replaced.
•
AVOID
the use of extension cords, power strips, power taps, outlet style air fresheners or other cord connected device, as these
devices may overheat and cause a fire hazard.
•
DO NOT
route power cord under rugs, carpets, runners or furniture. This may damage the cord or cause it to overheat creating a fire
hazard.
•
ALWAYS
place the Fan on a stable, flat, level surface while in operation to prevent the Fan from overturning.
•
NEVER
insert or allow fingers or objects to enter grill openings while Fan is in operation or injury and/or damage to the Fan may occur.
•
DO NOT
block, cover or obstruct air flow to or from the fan while in operation.
•
DO NOT
use this Fan outdoors or near water or wet locations such as a bath tub, pool or hot tub. Use of this Fan in a wet location
may create a shock hazard.
•
DO NOT
route power cord in or through areas such as doorways or where the cord may be damaged or create a tripping hazard.
•
NEVER
use a single extension cord to operate more than one Fan or other electrical device.
•
DO NOT
use this Fan in a window. Rain may create an electrical hazard.
•
DO NOT
use this Fan if it has been damaged or is not functioning properly.
•
DO NOT
operate any fan with a damaged cord or plug. Discard fan.
•
THIS FAN DOES NOT MEET THE REQUIREMENTS OF NEC ARTICLE 547-7 (2008)
.This Fan is not suitable for use in agricultural
facilities including areas where livestock, poultry or other animals are confined. Please refer to National Electric Code (NEC) Article
547-7 (2008), or applicable state or local codes or standards relating to electrical requirements for agricultural buildings.
•
THIS FAN DOES NOT MEET THE REQUIREMENTS OF NEC ARTICLE 500 (2008)
.This Fan is not suitable for use in hazardous
locations. Please refer to National Electric Code (NEC) Article 500 or applicable state or local codes or standards relating to electrical
requirements for hazardous locations.
NOTICE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This
equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particu-
lar installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient
or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet
on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.
The user is cautioned that changes and modifications made to the equipment without the approval of manufacturer could void the
user’s authority to operate this equipment.
CAUTION
