NEW 5/20
4
2085414
SAFETY FEATURE
1. A thermal overload protector is built in to prevent overheating.
2. If an overheat temperature is reached, the Heater will automatically shut off. It can only resume operation when the user resets the unit.
To Reset Heater:
1. Unplug the Heater and wait 10 minutes for the Heater to cool down.
2. After the Heater has cooled down, plug the unit into a 120V~ electrical outlet and follow the operation instructions described in this manual.
TROUBLESHOOTING TIPS
If your Heater shuts off unexpectedly or fails to operate, the previously mentioned safety feature may have been activated to prevent overheating.
1. Be sure the power cord is plugged into a working electrical outlet.
2. Check your Temperature setting. The Heater may be off because it has reached the desired temperature setting.
3. If your Heater runs for several minutes and shuts off repeatedly, your Heater may require cleaning. See Maintenance section below.
SERVICING:
For servicing, other than general user maintenance, please contact Customer Service at (800) 233-0268, Monday through Friday,
from 8am-5pm Eastern.
STORAGE:
Store the Heater with these instructions in the original carton in a cool, dry place.
DISPOSITION
: Corrugated packaging materials are recyclable. For environmentally responsible disposal of this product, contact your local waste
service provider or visit www.1800recycling.com
®
.
MAINTENANCE
To reduce the risk of electrical shock and fire please observe the following instructions.
Cleaning the Heater regularly will help to maintain its efficiency.
-
Always unplug the cord before moving, servicing or cleaning.
-
NEVER place the Heater in or near water. DO NOT IMMERSE HEATER IN WATER.
-
Clean the Heater only with a vacuum equipped with a brush attachment; the vacuum will remove
the lint and dirt from the surface of the Heater.
-
Vacuum intake grills every two weeks; this will help to maintain the optimum Heater performance.
-
Use a toothbrush or other soft bristle brush to gently loosen any dirt not removed by the vacuum.
-
NEVER attempt to take apart the Heater.
-
Clean the body of the Heater with a soft cloth only.
-
NEVER use ALCOHOL or SOLVENTS such as gasoline, benzene, paint thinner, or other harsh cleaners.
LASKO PRODUCTS, LLC LIMITED WARRANTY
(
VALID IN THE USA, ITS TERRITORIES, AND CANADA ONLY)
WHAT THIS WARRANTY COVERS
: This product is warranted against defects in workmanship and/or materials.
HOW LONG THIS WARRANTY LASTS
: This warranty extends only to the original purchaser of the product and lasts for three (3) years from the date of original
purchase or until the original purchaser of the product sells or transfers the product, whichever first occurs.
WHAT LASKO WILL DO
: Lasko will, at its sole option, repair or replace any part or parts that prove to be defective or replace the whole product with the same
or comparable model. For all warranty claims, the product must be returned to Lasko Products, LLC at customer expense with proof of purchase within the
warranty period. Contact the Lasko customer service department to obtain a Return Authorization (“RA”). DO NOT return products without an RA or the warranty
claim will not be processed.
WHAT THIS WARRANTY DOES NOT COVER
: This warranty does not apply if the product was damaged or failed because of accident, improper handling or
operation, shipping damage, abuse, misuse, unauthorized repairs made or attempted, or the use of the product for commercial or nonresidential service. This
warranty does not cover shipping costs for the return of products to Lasko for repair or replacement. Lasko will pay return shipping charges from Lasko following
warranty repairs or replacement.
ANY AND ALL WARRANTIES, EXPRESSED OR IMPLIED (INCLUDING, WITHOUT LIMITATION, ANY IMPLIED WARRANTY OF MERCHANTABILITY), LAST
THREE YEARS FROM THE DATE OF ORIGINAL PURCHASE OR UNTIL THE ORIGINAL PURCHASER OF THE PRODUCT SELLS OR TRANSFERS THE
PRODUCT, WHICHEVER FIRST OCCURS AND IN NO EVENT SHALL LASKO’S LIABILITY UNDER ANY EXPRESS OR IMPLIED WARRANTY INCLUDE (I)
INCIDENTAL OR CONSEQUENTIAL DAMAGES FROM ANY CAUSE WHATSOEVER, OR (II) REPLACMENT OR REPAIR OF ANY HOUSE FUSES, CIRCUIT
BREAKERS OR RECEPTACLES. NOTWITHSTANDING ANYTHING TO THE CONTRARY, IN NO EVENT SHALL LASKO’S LIABILITY UNDER ANY EXPRESS
OR IMPLIED WARRANTY EXCEED THE PURCHASE PRICE OF THE PRODUCT AND ANY SUCH LIABILITY SHALL TERMINATE UPON THE EXPIRATION OF
THE WARRANTY PERIOD
.
Some states and provinces do not allow limitations on how long an implied warranty lasts, or the exclusion or limitation of incidental or consequential damages,
so these exclusions or limitations may not apply to you. This warranty gives you specific legal rights. You may also have other rights which vary from state to
state and province to province.
Proof of purchase is required before a warranty claim will be accepted.
CUSTOMER SERVICE:
Toll-Free (800) 233-0268. Email: [email protected]
Our Customer Service team is available to assist you with product and service questions, and replacement parts. They can be reached Monday
through Friday, 8am-5pm Eastern. Please have your model number available, as well as the type and style (located on the underside of your product).
Customer Service Dept., 820 Lincoln Ave., West Chester, PA 19380
(Please do not send product to this location) www.lasko.com
PARTS FOR DISCONTINUED, OBSOLETE AND CERTAIN OTHER PRODUCTS MAY NOT BE AVAILABLE. DUE TO SAFETY REASONS, MANY
ELECTRONIC COMPONENTS AND MOST HEATER COMPONENTS ARE NOT AVAILABLE TO CONSUMERS FOR INSTALLATION OR REPLACEMENT
.
Manual printed in USA
AUTOMATIC TEMPERATURE CONTROL
The automatic temperature function will only operate on "High" heat. You can-
not set the temperature automatically when the unit is in the low heat mode.
1. To set the room at a specific temperature press the ( ) or ( ) buttons
to the desired temperature. The display will now reflect the (
) and the
temperature will be flashing. The Heater is now in Auto Temperature Mode.
2. When you reach the temperature at which you want to set the unit, the
set temperature will flash several times and then the display will return
to indicate the current room temperature and will gradually change as
the room temperature changes. NOTE: the temperature display does not
indicate the temperature of the heated air being emitted by the Heater.
3. Once the room temperature reaches 2 degrees above the set temperature,
the Heater will shut off. Once the room temperature reaches 1 degree
below the set temperature, the Heater will turn back on and continue to
cycle off and on to maintain the set temperature.
4. This function will cancel if the (
) button is pressed. The Heater will now
be in High heat and run continuously.
NOTE:
It is normal for the Heater “fan” to run for approximately 15 seconds
when the Heater shuts off after reaching the set temperature. Press the
( ) and ( ) buttons at the same time to change the display to ° Celsius.
Press the same two buttons together again to change the display back
to ° Fahrenheit.
NEW 5/20
5
2085414
Desde 1906
Utilizado para Modelo:
CC24920
Lea y Guarde Estas Instrucciones
Lea cuidadosamente las instrucciones antes de intentar armar, instalar, usar o dar mantenimiento al producto
descrito. Protéjase a sí mismo y a los demás cumpliendo con toda la información de seguridad. El no seguir las
instrucciones podría resultar en lesiones personales y/o daños a la propiedad.
Este Calefactor está diseñado para ser usado como calefacción complementaria. Este Calefactor es para uso
residencial únicamente. No está destinado para ser usado en instalaciones comerciales, industriales o agricultura.
Tiene Preguntas? Necesita una Parte?
Por favor no regrese el producto a la tienda!
Contacte al departamento de servicio al cliente
de Lasko Products: (800) 233-0268
Lunes - Viernes 8am a 5pm (Tiempo del Este)
(Válido en EE.UU., sus territorios, y Canadá únicamente)
Calefactor Ciclónico Cerámico
Manual de Instrucciones
Registre su producto hoy
www.lasko.com/product-registration
Podrás disfrutar de los siguientes beneficios:
- Soporte eficiente y avanzado
- Actualizaciones acerca del producto en el futuro
Escanee con un teléfono inteligente
