background image

MODELO 2554

Rev. Q 9/15

2

2554ES

Rev. Q 9/15

11

2554ES

SAVE THESE INSTRUCTIONS

IMPORTANT SAFETY INFORMATION

When using electrical appliances, basic precautions should always be followed to reduce 

the risk of fire, electrical shock and injury to persons, including the following:

Read all instructions before using this Fan.

TO REDUCE THE RISK OF FIRE, ELECTRICAL SHOCK OR PERSONAL INJURY, ALWAYS 
FOLLOW THESE IMPORTANT SAFETY INSTRUCTIONS AND WARNINGS: 

DO NOT 

use this fan to ventilate areas where flammable liquids or vapors are used, stored or are present, including paints, 

gasoline, varnishes, floor refinishing products or solvents. ALWAYS read and follow all warnings and instructions on the 
containers for these products!

ALWAYS

 be sure the plug fits tightly into the outlet.  When plugs fit loosely into outlets, they may slip partially out of the 

outlet and create a poor connection.  This may cause outlets to overheat and create a potential fire hazard. Outlets in this 
condition should be replaced by a qualified electrician.

ALWAYS

 unplug the power cord when servicing, cleaning or moving the Fan.  DO NOT use the ON/OFF switch as the sole 

means of disconnecting power. NEVER leave children unattended when the Fan is on or plugged in.  ALWAYS turn off and 
unplug the Fan when not in use.

BE CERTAIN

 that the power source for the Fan is 120V AC.  DO NOT plug the Fan into 240V or other power source.

The 

Blue Plug™ 

on your Lasko fan is a safety feature. It contains a non-replaceable safety device (fuse) that should not be 

removed or tampered with. To reduce the risk of fire, electric shock and personal injury, 

DO NOT

 attempt to remove, replace, 

repair or tamper with the originally supplied plug. If the Fan has stopped functioning, it may be due to the safety device 
incorporated in this plug. 

THIS FAN HAS A POLARIZED PLUG 

(one blade is wider than the other). This plug is designed to fit into the outlet only one 

way. Match the wide blade to wide slot in outlet and FULLY INSERT.  DO NOT attempt to bypass or defeat this safety fea-
ture. If the plug does not fit in the outlet, consult a qualified electrician. The outlet may need to be replaced.

• 

AVOID

 the use of extension cords, power strips, power taps, outlet style air fresheners or other cord connected device, as these 

devices may overheat and cause a fire hazard.

DO NOT

 route power cord under rugs, carpets, runners or furniture. This may damage the cord or cause it to overheat creating a fire 

hazard.  

ALWAYS

 place the Fan on a stable, flat, level surface while in operation to prevent the Fan from overturning.  

NEVER

 insert or allow fingers or objects to enter grill openings while Fan is in operation or injury and/or damage to the Fan may occur.

DO NOT

 block, cover or obstruct air flow to or from the fan while in operation.

DO NOT

 use this Fan outdoors or near water or wet locations such as a bath tub, pool or hot tub. Use of this Fan in a wet location 

may create a shock hazard.

DO NOT 

run cord under carpeting. Do not cover cord with throw rugs, runners, or similar coverings. Do not route cord under furniture 

or appliances. Arrange cord away from traffic area and where it will not be tripped over.

NEVER

 use a single extension cord to operate more than one Fan or other electrical device.

DO NOT

 use this Fan if it has been damaged or is not functioning properly.  

•Remote controls for other appliances or electronic equipment can sometimes interfere with the operation of this Fan. If this occurs, 

move the Fan to another location.

•Keep Fan remote control unit away from chairs and your bed where it may be sat or laid upon and inadvertently turn on the Fan.

THIS FAN DOES NOT MEET THE REQUIREMENTS OF NEC ARTICLE 547-7 (2008)

.This Fan is not suitable for use in agricultural 

facilities including areas where livestock, poultry or other animals are confined. Please refer to National Electric Code (NEC) Article 

547-7 (2008), or applicable state or local codes or standards relating to electrical requirements for agricultural buildings. 

THIS FAN DOES NOT MEET THE REQUIREMENTS OF NEC ARTICLE 500 (2008)

.This Fan is not suitable for use in hazardous 

locations. Please refer to National Electric Code (NEC) Article 500 or applicable state or local codes or standards relating to electrical 

requirements for hazardous locations.

NOTICE:

 This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the 

FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This 

equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, 

may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particu-

lar installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning 

the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:  Reorient 

or relocate the receiving antenna.  Increase the separation between the equipment and receiver. Connect the equipment into an outlet 

on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. 

The user is cautioned that changes and modifications made to the equipment without the approval of manufacturer could void the 
user’s authority to operate this equipment.

CAUTION

FUNCIÓN DE PERSIANA 

(Figura 5)

Además de la función oscilante, este Ventilador está 

equipado con persianas en la parrilla anterior, lo cual permite 

ajustar verticalmente el flujo de aire. Haga girar el control 

de persiana 

(Insertar 5A)

 hacia arriba o hacia abajo para 

ajustar el flujo de aire según su preferencia.

CONTROL REMOTO

 (Figura 4)

Todas las funciones realizadas con el Control Remoto 

funcionan idénticamente a los controles manuales. 

1. Instale dos baterías "AAA" de 1,5 Vcc (cada una, no 

incluídas)

2. No mezcle baterías viejas y nuevas. No mezcle baterías 

alcalinas, estándar (carbono-cinc) o recargables 

(níquel-cadmio).

3. No arroje las baterías al fuego, las baterías pueden estallar 

o puede derramarse el líquido contenido.

Insertar 5A

Figura 5

TIMER

POWER

OSC

SPEED

LOUVERS

TIMER

POWER

OSC

SPEED

IONIZER

Figura 4

Botón 

Temporizador

Botón

 Alimentación

Botón

 Velocidad

Baterías

AAA

Oscilación 

Botón

Ionizante Botón

   MANTENGA LAS BATERÍAS FUERA DEL ALCANCE DE LOS NIÑOS 

Reviews: