Laski TRENCHER TR 120H, Operating Instructions Manual

Page: 30 / 48

Trencher TR 120 H
30
o
While working on slippery or muddy ground (not only icy) or on
slopes, the trencher tracks may slip. In this case it is necessary to
make continuous corrections for keeping the required trench line.
To avoid slipping the machine into the trench:
o
go always perpendicularly to the trench while crossing it;
o
while connecting it with another trench you shall also cross the
already made trench perpendicularly so that the trench should be in
the middle of the track length. Then set both tracks into motion in
opposite directions and the machine turns in the required direction of
the trench line. Contrarily, if you need to go away from the trench, set
both tracks into motion in opposite directions again so that the
machine shall be perpendicularly to the trench and go away.
If you heard any strange noise or vibrations or felt a strange smell while working,
then turn off the engine and pull out the ignition key. Detect the cause and remedy
the failure. Do not carry out any repair where its solution exceeds your
experiences. In this case contact your dealer or