Manual: Garden Series
page 6 / 13
6. Installation & operation
1. Choose a suitable indoor or outdoor location for your laser light effect.
2. Installation:
•
For fixed installation: It is possible to use the bracket of the device to fix it at a wall
or object. Use a screw to fix the device. Make sure the device is properly mounted.
•
For temporary installation: Place the device into the desired position or use the
stake (included in delivery). Open the hex bolt at the broad end of the stake
and attach the stake to the unit by fastening the hex bolt. Make sure the stake is
properly mounted at the device. Stick the stake into the ground.
3. Connect the power adapter to the power cable of the device. Connect the power adap-
ter to mains.
4. Your laser device starts to project immediately.
5. Disconnect the device from mains to switch off the laser light effect.
7. Service notes
•
Quick on/off switching of this device will
reduce durability of the laser diode dra-
matically.
•
Avoid sharp knocks and shocks to this
device and ensure sufficient protection
during transportation. Look after your La-
serworld product.
•
Disconnect the device from the mains
when it is not needed. Diodes are swit-
ched on and can wear out even if there is
no visible laser output.
•
The devices of the Garden Series are not
meant for professional applications.
•
Damages on the device caused by im-
proper handling, neglect of the safety
instructions and service notes will void
warranty.
