background image

Manual: Garden Series

page 4 / 13

1. Product and package contents

Please check if all listed parts are included and undamaged. Included in delivery:

1 x laser light effect;  

1 x stake;  

1 x power adapter;   

1 x manual

3. Initial operations, safety instructions

1.  Make sure to use 

correct voltage

; see in-

formation in this manual.

2.  Make sure that the device is 

not connec-

ted to mains 

during installation.

3.  Installation has to be done according to 

safety regulations of the respective coun-

try.

4.  Always ensure that maximum permis-

sible exposure (MPE) is not exceeded 

in areas accessible, to the people or 

animals. A minimum distance of mi-

nimum 1.5 meters  at direct exposure 

onto persons or animals has to be ob-

served!

5.  If the device has been exposed to 

great 

temperature changes

, do not switch it 

on immediately. Condensation may da-

mage device.

6.  Never use dimmer, RC or other electroni-

cally switched sockets. Whenever possib-

le, do not use the laser projector together 

with large appliances (especially fog ma-

chines) on the same mains!

7.  Ensure 

sufficient ventilation

 and do not 

place the device on any warm or heat ra-

diating surface.  Ensure that the device 

does n

ot get overheated

.

8.  Do not operate this device below 10 de-

grees Centigrade.

9.  This unit is intended for indoor and out-

door use.

2. Preliminary warning notices

1.  Please use this device only 

according to these operating instructions

2.  Do not use the device if there are any 

visible damages

 on housing, power adapter or 

power cords. 

3.   

Never look directly into the light source

 of a laser projector. 

4.   This device is manufactured according to protection class IP67. It is dust-proof and protec-

ted against temporary submergence. 

Do not operate the device under water. 

4. Do not open the device

This product has no user serviceable parts inside.  Do not open the device - dangerous 

laser radiation!

Summary of Contents for Garden Series














Reviews: