Manual: Evolution Series ES- 400RGB
page 4 / 19
1. Scope of delivery & details
Please check if all listed parts are included and undamaged. Included in delivery:
1 x laser projector
1 x power cable
1 x manual
3. Initial operations, safety instructions
1. Make sure to use
correct voltage
; see in-
formation on device & in this manual.
2. Make sure that the device is
not connec-
ted to mains
during installation.
3. Installation has to be done by
technical
experienced and qualified persons
ac-
cording to safety regulations of the res-
pective country.
4. Always ensure that maximum permissib-
le exposure (MPE) is not exceeded in are-
as accessible to the public.
5. In some countries an additional ins-
pection by technical control institutes
could be necessary.
6. Connect an
easily accessible inter-
lock connector or circuit breaker
to the projector.
7. The power supply should be easily acces-
sible.
8. When installing the laser mount it with
a minimum distance of 15 cm from walls
and objects.
9. For safe setup e.g. on walls or ceilings
please use a
safety cord.
The safety cord
should be able to withstand tenfold the
weight of the device. Please follow the
accident prevention regulations of pro-
fessional associations and/or comparable
regulations for accident prevention.
10. If the device has been exposed to
great
temperature changes
, do not switch
it on immediately. Condensation water
may damage device.
2. Preliminary warning notices
1. Please use this device only
according to these operating instructions
.
2. Do not use the device if there are any
visible damages
on housing, connector panels,
power supplies or power cords.
3.
Never look directly into the light source
of a laser projector. Danger of blindness!
4.
Do not operate the device at high humidity, in the rain or in dusty environments.
5.
Protect device against dripping or splashing water.
Do not place any liquid filled
containers at the device.
Warranty claim expires with removal of warranty label.
