8.2. Music mode, Sound-to-light operation
Your device runs in
music mode:
Control the music-sensitivity with the trim pot at the front panel. The LED is flas-
hing when the device is triggered.
8.3. DMX-512 mode
Switch 10 must be set to „off“, the other switches are used for setting the DMX
address:
Connect a DMX controller to operate the laser.
Use the switches 1 - 9 to set the DMX address of the laser. Each switch represents a
number. To define a number use the preceding number and multiply it by 2:
Switch
1
2
3
4
5
6
7
8
9
10
Number 1
2
4
8
16
32
64
128
256
Mode Switch
The laser uses 12 DMX channels, so make sure that the next device uses an address
that doesn’t overlap with this range.
Channel
Value
Function
1
0 - 69
Laser off
70 - 139
Sound mode
140 - 209
Automatic mode
210 - 255
DMX mode
2
0 - 255
Pattern selection
3
0 - 255
Strobe effect
4
0 - 255
Dash effect
5
0 - 255
x axis positioning
6
0 - 255
y axis positioning
Channel
Value
Function
7
0 - 255
Zoom / size
8
0- 255
Color
9
above 200
Reset
10
0 - 255
Rotate x axis
11
0 - 255
Rotate y axis
12
0 - 255
Rotate z axis
Please note that a pattern can not necessarily be combined with each effect.
8.4. Turn laser off
To turn off the device switch it off („OFF“), switch the key to „OFF“ and disconnect
the power cable from the mains.
Summary of Contents for ES-400RGB QS
Page 17: ......
