User manual: CS-400G
Rev: 02/2009
page5 of 6
Technical specifications
•
Lasersources:
aircooled DPSS Laser
•
Power (of the diodes):
typical 400mW, minimum 300mW 532nm green
•
Laserclass:
3b
•
Modes:
ILDA, DMX 512, auto, music active
•
ILDA:
25pin ILDA standard Sub-D shaped 25pin connector
•
Galvos:
25k scanspeed
•
DMX 512:
15 channels
•
Patterns:
85 + 43 animations
•
Scanangle:
ca. 40°
•
Beam:
ca. 3mm/1mrad
•
Accessories:
power cable, key switch, interlock connector, manual
•
Input voltage:
AC 220~240V 50/60Hz
•
Power consumption:
50W
•
Size:
300 x 300 x 150mm (W x D x H)
•
Weight:
5kg
•
Operating temperature:
10°-35°C
Trouble shooting
No beam: emergency switch/dongle not connected.
Low output: clean mirrors/window
Musicmode not working: wrong DIP switch setting
Sensitivity too low
No DMX control: wrong DIP switch setting
ILDA connected
Laser does not switch to ILDA mode:
•
The interface does not connect pins 4 and 17 (Interlock) of the IDLA signal. See interface
manual
•
The cable does not connect pins 4 and 17. Use a cable that connects pins 4 and 17.
•
Use an adapter that connects pins 4 and 17.
Please note
This device has left our premises in absolutely perfect condition. In order to maintain
this condition and to ensure a safe operation, it is absolutely necessary for the user
to follow the safety instructions and warning notes written in this user manual.
Laserworld cannot be made liable for damages caused by incorrect installations and
unskilled operation!
