LaserMech FiberMINI 2.0, Operation Manual

Page: 27 / 54

PLMNL0286 REV. B, Effective Date: 06/06/19
22
FiberMINI
®
with Auto Focus (AF) Operation Manual
3.6 Control Box Indicator Lights
The control box has (5) indicator lights.
See
Figure 21 . It uses the discrete I/O
control box (PLCSA0081) as an example.

The indicator light labeled POWER
illuminates in green when power is
supplied to the control box.

The indicator light labeled READY
illuminates in green when the READY
output is active. The light illuminates
in red when a temperature fault is
detected within the head.

The indicator light labeled TOUCH
illuminates in green when the tip is in
contact with the part or another
conductive surface.

The indicator light labeled IN-
POSITION illuminates in green when
the lens is located at the target
position. The light illuminates in red
when the servo is shut off due to a
position fault, sending the lens to the
fully retracted position.

The indicator light labeled STATUS
illuminates in green when serial
communication is established with the
head. The light illuminates in red when
communication is lost.
Figure 21