LaserLiner ThermoCamera Connect, Manual

Page: 9 / 15

ThermoCamera Connect
9
6.0
0.95
0.95 5
6.1
V 2.3.7
5.9
EN
Version
Settings
Settings: Version
Auto shutdown
Time format
Set time
Spot
WLAN
Version
Image correction
Intensity
Language
Emissivity
Before each use, check the settings for infrared measurement and adjust them to the respective
measuring situation to ensure accurate measurements. Pay particular attention to the general
parameters for the emissivity coefficient.
Emissivity: Emissivity coefficient
The level of infrared emissions given off by everything depends on the specific material and surface. This
factor is determined by the emissivity coefficient (0.10 ... 1.0). For accurate measurements, it is absolutely
essential that the emissivity coefficient is set first. The emissivity coefficient can either be custom set or
selected based on the predefined emissivity coefficients from the material list.
Images
Color palette
Emissivity
Settings
Matt (e=0.95)
Semi-matt (e=0.85)
Semi-gloss (e=0.60)
Glossy (e=0.30)
Individual
Emissivity
Matt (e=0.95)
Semi-matt (e=0.85)
Semi-gloss (e=0.60)
Glossy (e=0.30)
Individual
Emissivity
Decrease value
Increase value
Confirmation
Exit menu