LaserLiner PowerCross-Laser 8 S, Operating Instructions Manual

Page: 24 / 64

24
Data transfer
The device features a Bluetooth
®
* function that enables wireless data transfer
to mobile devices with a Bluetooth
®
* interface (such as a smartphone or tablet).
The system prerequisites for a Bluetooth
®
* connection are specified at
http://laserliner.com/info?an=ble
The device can set up a Bluetooth ® * connection with Bluetooth 4.0 compatible
devices.
The range is set to a maximum distance of 10 m from the terminal device
and greatly depends on the ambient conditions such as the thickness and
composition of walls, sources of interference as well as the transmit / receive
properties of the terminal device.
Once it has been activated, Bluetooth
®
* remains switched on indefinitely
as the radio system is designed with exceptionally low power consumption.
A mobile device can link up to the active measuring device via an app.
Application (app)
An app is required to use the Bluetooth
®
* function. You can download the
app from the corresponding stores for the specific type of terminal device:
Make sure that the Bluetooth ® * interface of the mobile device is activated.
!
After starting the app and activating the Bluetooth ® * function, a connection
can be set up between a mobile device and the measuring device. If the app
detects several active measuring devices, select the matching device.
This measuring device can be connected automatically the next time it is
switched on.
* The Bluetooth ® word mark and the logo are registered trademarks of Bluetooth SIG Inc.
Additional functions via the app
The app offers a range of additional functions. If it is not possible to control
your device via the app for technical reasons, reset the device to the factory
settings by switching it off and back on again so that you can continue to use
the regular functions without problems.
EN