MasterCross-Laser 2 / MasterCross-Laser 2G
09
4
5
3
1
9
10
7
8
6
When transporting always
switch off all lasers, secure
the pendulum and set the
slide switch to "OFF"!
!
Laser emitting window
Slide switch
a
ON
b
Slope mode
c
OFF / Transport lock
Battery compartment
(bottom)
5/8” tripod threads
(bottom)
1/4” tripod threads
(bottom)
Hand receiver mode
LED Hand receiver mode
LED levelling
red: levelling off
green: levelling on
LED Status indicator
Laser line selection button
1
2
3
4
5
6
7
8
9
10
LASER
LASER
LASER
LASER
2
Horizontal and vertical levelling
Release the transport restraint, set slide switch (2) to "ON". The laser cross will appear.
The laser lines can be switched individually with the selection button.
The transport restraint must be released for horizontal and vertical levelling. The LED shows
a permanent green light. The laser lines flash and the LED lights red as soon as the device is outside
the automatic levelling range of 3°. Position the device such that it is within the levelling range.
The LED switches back to green and the laser lines stop flashing (steady light).
!
2
a b c
GB
Summary of Contents for MasterCross-Laser 2
Page 57: ...MasterCross Laser 2 MasterCross Laser 2G 57 57...
Page 58: ...58 58...
Page 59: ...MasterCross Laser 2 MasterCross Laser 2G 59 59...