Dirty sensors (mud, snow, ice, etc..)
Clean the sensor with a suitable cloth.
Sensors
ed too low (see page 4)
install
Use angled supports to tilt the sensors
upward. If there is still the problem select
the functions 4
and/or .
3, 45,46
49
Rear side of sensors in contact with chassis
of vehicle
Separate sensors from the body of the
vehicle. They must not touch.
Detection of a towing hitch, spare wheel,
etc.. (See notes page )
2
Select the n.
function to solve the
49
problem.
If irregular false obstacle indication occurs,
one of the following problems:
verify
None acoustic signal
- If the ACOUSTIC signalling are missing verify that the n.1 function is not stored as
“00” then verify the correct connection of the speaker or display (see pag. )
8
PROBLEM SOLVING
Change of use of the control unit
- in case a control unit be used as a Rear or conversely, it is needed to change the
programmable function n.2 by choosing the use desired.
Pag.26
The Display shows the writ n “L ”
i g
O
- there is a low power supply to the unit.
The Display shows the writing “IF”
- There is a parameter setting through smartphone or PC with WIFI module
interface.
6
Extraction wires procedure
Extractor.
Front view
6
The Display shows the writing “LE”
- In case of connection of the Display Check that the wire in position n.4 is not
accidentally connected to ground.
Summary of Contents for EPS4016
Page 19: ...Pag 19 NOTE...
Page 27: ...Pag 27 NOTE...
