ENGLISH
17
SELF CODING REMOTE CONTROL AND ELECTRONIC KEYS HANDSETS
In case you lose a remote or need to code a new one your installer will be able to quickly
re-code and replace it in the following way:
l )
Ensure alarm is disarmed with the original remote handset.
2)
Turn ignition to on position.
3)
Move DIP switch No. 3 to ON position (see DIP SWITCH CODING TABLE).
4)
Plug the electronic key in and extract it from proper socket, or push button
1
of the
remote control;The LED on the dashboard will now light on constantly.
5)
Within 30 seconds of constant LED illumination, press arm/disarm button on the new
remote, and plug all the new electronic keys in and extract them from proper socket until
facia LED 'blinks'. They are now coded.
6)
Reposition DIP switch No. 3 to its original position, turn off ignition switch and test
remote operation.
PAY ATTENTION:
•
IF DIP SWITCH NUMBER 3 HAS NOT BEEN REPLACED IN OFF POSITION, ALL
REMOTE CONTROLS AND ELECTRONIC KEYS CAN BE DELETED.
•
You can add a maximum of 4 remotes and 4 electronic keys. Coding can only occurs
when LED is on in constant way; from coding of one remote to the other one can't pass
more than 30".
•
If you code a new remote or a new key, you have to code the old ones. Trough the
procedure before explained, if you lose a remote or an electronic key you can make
them useless.
ULTRASONICS AND WINDOWS CLOSER EXCLUSION
- Arm the alarm by remote button n° 1;
- Within 30" push button n°
2
. Exclusion of ultrasonics and windows closer will be signalled by 1 flash
of indicator lights and 1 acoustic signal.
- Functions will be automatically restored when alarm will be disarmed.
SIREN EXCLUSION THROUGH REMOTE CONTROL
Turn the ignition key ON.
Push the button n°
2
on the remote handset (see fig 1).
The red LED will flash once. This means that the SIREN function has been excluded.
These functions will be automatically restored when alarm will be disarmed.
RESYNCRONISATION PROCEDURE
After certain activities (i.e. battery change) it may be necessary to push middle button
of the remote until the LED is extinguished. Depressing the same button a second
time, the remote will start again usual working.
Is996v2 ita-ing.pm6
05/03/98, 16.27
17
Downloaded from
www.Manualslib.com
manuals search engine
