background image

IMMOBILISATION*

When the alarm system is armed, an internal relay isolates a vehicle starting circuit (e.g. starter
motor) to help prevent running of the vehicle.

PASSIVE IMMOBILISATION*

The internal relay activates automatically after 30 seconds of turning the ignition OFF or 60
seconds after the alarm has been disarmed using the remote control, without turning the ignition
key ON. The LED (see fig. 2) installed on the dashboard will begin flashing rapidly to indicate that
the internal relay is in the immobilised condition. Whilst in the passive immobilised condition,
when the ignition is turned ON the alarm will generate audible tones. If the passive immobilisation
is not disarmed by the 10

th

 audible tone the alarm will fully arm and then sound an alarm

condition.
To disarm the passive immobilisation, turn the ignition key to the ON position and press button “A”
of the remote control. The audible tones will be interrupted and the LED will stop flashing.

BUTTON ‘B’ FUNCTIONS (Panic and Excluding the ultrasonic sensors and electric power
window* module)

Panic function: 

Pressing this button twice within a maximum of 3 seconds activates the siren for 10

seconds and the additional siren*. To stop the sound prior to the 10 seconds, press button ‘B’ on the
remote control.

Excluding the ultrasonic sensors and electric power window* module using the remote
control: 

Arm the alarm system using button ’A’ on the remote control; within 30 seconds (pre-

alarm time) press button ‘B’ of the remote control. The direction indicator lights will flash once and
you will hear a brief audible tone to confirm the programming. Now the ultrasonic sensors and
accessory output are temporarily deactivated.

The functions will be reset the next time the alarm is armed using the remote control or
an electronic key.

Summary of Contents for 211UK

























Reviews: