Caution: Please remember the signal output of last machine must
connect the attached circle plug .The circle plug connect a 120
resistor between 2 feet and 3 feet canon plug. The signal reflects
phenomena can be avoided by using circle plug during DMX 512
signal transfer. (DMX TERMIN ATOR CONNECTION):
PIN 2
PIN 3
2
1
3
120
Ω
Connect a 120 resistor
across2-pin and 3-pin XLR
plug and insert into the
DMX OUT socket on the
last unit in the chain.
The
light use 3 feet XLR plug, if the controller you use is 5
feet XLR plug. You must use a inter change line from 5 feet to 3 feet.
See the following. The transform of 3-pin and 5-pin XLR adaptor.
laser
The 3pin and 5pin Canon DMX512 connector circuit
5 pin cannon (input)
Pin 1: GND (SCREEN)
Pin 2: Signal(-)
Pin 3: )
Pin 4: N/C
Pin 5: N/C
5 pin cannon (output )
Pin 1: GND (SCREEN)
Pin 2: Signal(-)
Pin 3: )
Pin 4: N/C
Pin 5: N/C
3 pin cannon (input)
Pin 1: GND (SCREEN)
Pin 2: Signal(-)
Pin 3: )
3 pin cannon (output)
Pin 1: GND (SCREEN)
Pin 2: Signal(-)
Pin 3: )
4
Fifth
、
Operation instruction
The light has five functions: Music, Automatic, DMX 512,
Master-Slave/ILDA PC
5-1 The international standard DMX512 control. When the
DIP10 is OFF, the DIP 1-9 are DIP swift.
Summary of Contents for LL-2W RGB
Page 15: ......
