12
Breakdown cause
Major breakdown analysis and solution
Product common breakdown comparative chart
The fixture no work
1. Check the power cable whether to connect the fixture, whether the fuse
does burn out.
2. Check the input voltage whether to assign the voltage match with the
fixture.
No sound control
1. Check the address code or the display whether establishes according to
the instruction booklet is the voice control pattern.
2. Check the potentiometer possibly moves is smallest, attempt to adjust
the potentiometer.
Master-slave mode, The
master mode is normal,but
slave mode is not normal
1. Please conformed only one for the master and the master without DMX
be connected, and to set master as sound control or auto pattern.
2. If the Master-slave setting is right but still have problem, please check
the XLR connect cable.
The button malfunction,
does not work.
1. Check the buttons whether to have some button not to have the
normal reset.
The fixture can
bright normally,
but it not controlled
by controller
1. Please check the fixtures' DIP outset address setting whether correctly.
2. Please check the XLR signal cable whether be damage.
The fixtures' brightness
obvious dim
1. Check the LED tubes or the laser already whether to be service life.
2. Check the internal and external optical system whether to be clean.
Summary of Contents for LL-2W RGB
Page 15: ......
