USER MANUAL
SPK-BT15
5
CHARGING THE SPK-BT15
It is recommended to thoroughly charge electronic devices overnight before using it for the
first time. Subsequent charges can be as needed
1.
Turn off the SPK-BT15 before charging
2.
Connect the SPK-BT15 using the supplied USB cable to a power source such as PC or
USB charging device.
3.
When the red indicator light is ON, the speaker is in charging mode
4.
When the red light is OFF, the speaker is fully charged
Note: Your SPK-BT15 takes up to 3 hours to fully charge
SWITCH ON/OFF THE SPK-BT15
Function
Operation
Switch on
Slide the power button to ON. The readout will display “HI” (Hello) and an
audio chime will sound. The unit will then default to Bluetooth mode.
Switch off
Slide the power button to OFF to turn OFF.
SCANNING FOR RADIO STATIONS
NOTE: EARPHONES MUST BE INSERTED INTO THE SPEAKER FOR SEARCH OR PLAYBACK AS
THE EARPHONE CABLE IS USED AS AN ANTENNA.
Upon initial set (or if you move to a new location for suburb) you should do a complete new
search for radio stations. Do this by holding down the PLAY button while in RADIO mode.
The speaker will then automatically scan through all stations and depending on suitable
signal strength, save them to memory.
To move through pre-saved stations, simply press the PLAY button to advance to the next
station or the PREVIOUS or NEXT buttons to move backwards or forwards.
CONNECT TO PC OR MEDIA PLAYER WITHOUT BLUETOOTH
Connect the AUX cable to the audio input on your SPK-BT15 and the other end to you PC or
media player device.
PAIRING THE SPK-BT15 WITH
Note 1: Follow the below three common steps, before moving onto the specific section
relating to your device.
Note 2: Before you begin, ensure your SPK-BT15 and Bluetooth device are within 1
meters distance from each other.
Note 3: Once you have started the Bluetooth pairing procedure, there is a set period of time