Instructions
Fitting a polishing pad:
WARNING
: Remove battery pack before fitting or removing polishing pads.
• Refer to Figure 1: Press spindle lock button to lock gearbox (
1
).
• Screw on the polishing pad (M14 thread). If necessary, the spindle can also be held steady
by using a flat 17mm spanner.
• Note: never depress the spindle lock button when the spindle is moving. The tool may be
damaged.
• Inspect pad before use; do not use pads that are cracked or damaged.
ON / OFF Trigger:
• Refer to Figure 3: the ON/OFF trigger is designed to avoid accidental starting.
• To switch ON, (
1
) first unlock the trigger by fully pressing and holding the safety lock
button. (
2
) pull up and hold the ON/OFF trigger.
• To switch OFF, release the trigger, then release.
www.lasertools.co.uk
5
