Laser 7204 Instructions Download Page 1

www.lasertools.co.uk

Instructions

7204 | 7205 | 7206 | 7207 | 7208 | 7209

Classic Torque Wrench

Push Thru' Reversible Drive

Distributed by The Tool Connection Ltd

Kineton Road, Southam, Warwickshire CV47 0DR

T

 +44 (0) 1926 815000  

F

 +44 (0) 1926 815888

[email protected]  

www.toolconnection.co.uk

If this product fails through faulty materials or workmanship, contact our service 
department direct on: 

+44 (0) 1926 818186

. Normal wear and tear are excluded as 

are consumable items and abuse.

Guarantee

•  Tighten in a steady and controlled manner and stop 

applying pressure immediately the required setting 

has been reached. Tightening too quickly or in a jerky 

manner will result in an inaccurate final torque figure.

•  Take care to stop applying further torque once the 

desired setting has been reached. Over-torqueing can 

damage the wrench.

•  Do not adjust 

down

 to another torque setting; adjust 

down to zero then back 

up

 to the desired torque setting.

•  After using the wrench, unlock and turn the adjusting 

lever to the lowest setting for storage. The lever will stop 

when the lowest setting has been reached.

•  Keep the breaker mechanism lubricated with HP grease.
•  Never use the torque wrench to tighten a fastener to a 

higher torque than the maximum torque setting.

•  Do not use the torque wrench as a breaker bar.
•  Take care of the torque wrench and keep it clean; do not 

store in areas of high temperature or humidity.

•  Do not use any cleaning material or solvent that may 

affect the grease in the breaker mechanism.

Precautions

Please visit:

www.lasertools.co.uk/registration

for your online Guarantee Registration

7204-9_Instructions_V4

Our warranty policy is one year from date of purchase. 

Please register your date of purchase by going to: 

www.lasertools.co.uk/product-registration

To register you will be asked for the following information:

Name and Address

Retailers Name and Town

Date of purchase (always keep receipt)

Part Number and Serial Number

The Serial Number can be found on your Certificate of 

Conformance in accordance with ISO 6789-1.

Warranty

Reviews: