LTI TruPulse
360
R User’s Manual
Page 33
Copyright (c) [2017] Laser Technology, Inc. All Rights Reserved. Unauthorized duplication, in whole or in part, is strictly prohibited.
Slope Distance (SD)
Azimuth (AZ)
Inclination (INC)
Horizontal Distance (HD)
Vertical Distance (VD)
Height Routine (HT)
Section 5 - Measurement Modes
When you power ON the TruPulse 360
R, the last used Measurement Mode will be active.
Press
or
to display the previous or next Measurement Mode. Figure #20 shows six different
types of measurements that the TruPulse 360
R e can take. For information about the Missing Line
Distance Measurements
The basic steps for taking any distance measurement:
1.
Look through the eyepiece and use the crosshair to aim to the target.
2.
Press-and-hold
. The LASER status indicator is displayed while the laser is active.
The laser remains active for a maximum of 10 seconds while acquiring data about the target.
o
If the target is not acquired in the 10-second period, release
and repeat this step.
3.
Once the measurement is displayed, release
. The measurement flashes one time, indicating
the measurement was downloaded. Then the measurement is displayed steady until you press
any button or the unit powers OFF.
Figure #20
Summary of Contents for TruPulse 360
Page 1: ......
