LTI TruPulse
360
R User’s Manual
Page 32
Copyright (c) [2017] Laser Technology, Inc. All Rights Reserved. Unauthorized duplication, in whole or in part, is strictly prohibited.
1.
Holding the TruPulse 360
R and facing close to magnetic North (
±
15 degrees towards North).
The lenses should be facing as shown in Figure #19-1. Press
to store the first calibration point.
2.
Rotate the TruPulse 360
R 90 degrees, the lenses should be facing down as shown in
Figure #19-2. Press
to store the second calibration point.
3.
Rotate the TruPulse 360
R 90 degrees, the lenses should be facing back as shown in
Figure #19-3. Press
to store the third calibration point.
4.
Rotate the TruPulse 360
R 90 degrees, the lenses should be facing up as shown in
Figure #19-4. Press
to store the fourth calibration point.
5.
Rotate the TruPulse 360
R 90 degrees along the optical axis, the lenses should be rotated, facing
forward and the serial port pointing up as shown in Figure #19-5. Press
to store the fifth
calibration point.
6.
Rotate the TruPulse 360
R 90 degrees, the lenses should be facing down as shown in
Figure #19-6. Press
to store the sixth calibration point.
7.
Rotate the TruPulse 360
R 90 degrees, the lenses should be facing back as shown in
Figure #19-7. Press
to store the seventh calibration point.
8.
Rotate the TruPulse 360
R 90 degrees, the lenses should be facing up as shown in
Figure #19-8. Press
to store the eighth calibration point.
9.
Look through the eyepiece, either a pass or fail message appears in the Main Display.
PASS: Press the
to return to the Measurement Mode.
FAiL1: Excessive motion during calibration. Unit was not held steady.
FAiL2: Magnetic saturation error. Local magnetic field too strong.
FAiL3: Mathematical fit error.
FAiL4: Calibration convergence error.
FAiL6: Orientations were wrong during the calibration.
If a "FAiL" message appears, press
.
The message “no””CAL” will be displayed
allowing you to do a new calibration. See step # 5
. If the calibration fails, the
previous calibration is restored.
Summary of Contents for TruPulse 360
Page 1: ......
