LTI MapStar TruAngle User’s Manual 3rd Edition
Section #3 - Using the TruAngle
Page 5
Attaching the Side Brackets and the Laser
1. Attach the laser mounting bracket to the laser.
2. Attach right and left side brackets to the TruAngle.
•
The short side brackets are designed for use with the Impulse and the TruPulse.
•
The tall side brackets are designed for use with the UltraLyte
3. Attach the laser mounting bracket to the side bracket. The side bracket should be secure,
but should not be over tightened.
•
The required laser mounting bracket depends upon which laser you are using (Impulse,
TruPulse 200, TruPulse 200X, TruPulse 360, TruPulse 360R, TruSpeed Sx or UltraLyte).
Please contact LTI if you need assistance.
•
When attaching the laser to the side brackets, do not over-extend the side brackets.
Impulse
TruPulse 200 / TruPulse 360
TruSpeed Sx / TruPulse 200X / TruPulse 360R
UltraLyte
Figure #4