Laser Atlanta SpeedLaser S, User Manual

Page: 12 / 40

13
Battery Handle Power
The SpeedLaser
®
comes equipped with a rechargeable battery handle (or
additional extra handles as an option), shipped uncharged, so you will
need to charge them (10-12 hours) with the wall charger or 12V cigarette
cable completely before first use. Each handle will provide an average
of five (5) hours of continuous use per charge.
These handles are also capable of powering the SpeedLaser from a 12V
source such as an automotive cigarette power adapter using the cable
provided. Plug the small circular connector onto the bottom of the
handle and the cigarette adapter end into an automotive cigarette-power
adapter. You can charge the handles in this manner while oopperating
the unit.
To charge your battery handle:
1.
Plug the circular connector into the side of the handle. Do not
force the connector as it is keyed...slowly rotate the connector
(holding the black rubber) and push gently until it clicks and
locks into place.
2.
Plug the charger into a standard 120 VAC power receptacle OR
plug the cigarette adapter into a power source.
3.
Charge the handle for ten to twelve hours.
4.
To remove the connector, pull gently downward on the outside
of the metal connector.
5.
Unplug the charger from the wall. The handle is now charged.
CAUTION! DO NOT:
•
Charge handles with other chargers/power supplies
•
Short circuit the battery pins
•
Charge handle for over sixteen (16) hours continuously