Larzep HN-480, Instruction Manual

Page: 2 / 10

2
Instruction Manual
Hydropneumatic Trolley Jack “HN-480”
INDEX
1. BEFORE USING THE EQUIPMENT -------------------------- 2
2. ESSENTIAL SAFETY REQUIREMENTS --------------------- 2
3. TECHNICAL FEATURES ----------------------------------------- 3
START UP
ENVIRONME
NTAL CONDITIONS
4. START UP ------------------------------------------------------------- 3
5. MAINTENANCE ---------------------------------------------------- 4
6. WARRANTY ---------------------------------------------------------- 4
7. DECLARATION OF CONFORMITY -------------------------- 5
1. BEFORE USING THE EQUIPMENT.
Before using the hydraulic Trolley, read carefully these instructions and familiarize with security pictures.
This manual is a part of the machine is obligatory to read it and must be conserved.
The symbols used in this manual are the following:
ATENTION: This symbol depicts a security advertence, and looks that we have following strictly the manual indications. If we do not do it, should produce
material damages or personal injuries, also lethal damages.
Put the load settled.
Block the load and do not operate behind this.
The omission of these instructions may cause material and personal injuries that LARZEP, S.A. will not be responsible.
On the unpacking moment check that the hydro pneumatic Trolley is not damaged, or it have loosen pieces.
If any anomaly, damage, sign of corrosion, or any fault is find, do not use the equipment, store it in a clean place and where the children can not access it, until the
equipment be repaired or substituted.
The hydropneumatic Trolley has been designed and fabricated in order to elevate vehicles, the principal groups are:
1- Commands group
2- Lever group
3- Motor-pump group
4- Tank group
5- Cylinder and pistons group
6- Depressor group
7- Chassis-housing group
8- Tank group
2. ESSENTIAL SAFETY REQUIREMENTS.
Do not operate the overpressure valve, which is strapped.(3)
Before start the elevate operation, block the vehicle placing wedges in accordance with the wheels.
Put the load in a way that stay settled in the cylinder’s piston plate. (5)
o
Settled load.
Once the load is elevated, is necessary to block it, in order to avoid risks.
o
Block the load and do not operate behind it.
Do not elevate the load in restricted areas in order to avoid the risk of been trapped.
During the elevating and descending operations it must be assure that there is nobody under the load.
Do not elevate load in irregular surfaces, or dipped surfaces, to avoid the risk of dumping.
Do not assemble extensions or use spare parts that there is not authorized by your dealer or LARZEP, S.A.
There is the possibility to connect supplies to the piston of 70 mm and 120 mm.
3. TECHNICAL FEATURES.
MODEL
“HN-480”
CAPACITY 80 / 50 / 25 / 15 ton
HEIGHT 180 mm.
PISTON TOTAL STROKE 300 mm.
WORKING PRESSURE 8 / 12 bar
DIMENSIONS 1395 x 350 x 980
WEIGHT 78 Kg.
Never use faulty equipment.