CHAPTER 1
INTRODUCTION AND GENERAL CHARACTERISTICS
1-4
DC-20 and DC-21 operation manual
1.5.
Display mounting
1.5.1.
Mounting of the DC-20S and DC-21S.
The DC-20S and DC-21S displays can be fixed to the wall in two ways:
1
– Hanged. Place 2 of the supplied plug at 410mm from one to the other. Insert the
screws leaving their head outside for 4mm. Hang the display using the upper-side zig-zag.
2
– Screwed. Remove the methacrylate cover. Place the 4 supplied plugs at the distance
showed in the drawing. Place the 2 upper screws, leaving their head outside for 4 mm. Hang the
display using the upper-side zig-zag. Place the lower screws Tighten all the screws. Replace the
methacrylate cover.
The screws and plugs are provided with the display
Hanged:
4 Fixation Points
410
289
4 mm
PARED
