C
PARTS LIST
Chain Tension Device and
#8 x 3/4 Phillips Panhead Screw
Depress the plunger with your fingers and slide the Tension Device down to the
bottom of the chain.
IMPORTANT: When mounting tension device to a wood or metal surface, provided
screws can be driven directly into the mounting surface. When mounting tension
device to drywall, use anchors or fasteners that are designed for such substrates.
Consult your hardware store, building materials retailer, or supplier for guidance
on appropriate anchors or fasteners for your substrate.
Ensure the chain is not tangled or twisted.
RECESS MOUNT INSTALLATIONS
With the narrow end up, pull down on the Tension Device until the Plunger is
compressed half way.
With the Plunger compressed, place the Tension Device
against your frame as shown and make a mark through the two screw holes.
SURFACE MOUNT INSTALLATIONS
With the narrow end up, pull down on the Tension Device until the Plunger is
compressed half way.
With the Plunger compressed, place the Tension Device
against your frame as shown and make a mark through the two screw holes.
If mounting to wood or metal, drill holes through your marks with a 1/8” drill
bit. Then secure the Tension Device using the provided Phillips panhead screws.
If mounting the tension device to drywall, use anchors or fasteners appropriate
for the mounting substrate and follow anchor or fastener manufacturer’s
instructions.
5A
Plunger
A
5C
5C
5D
P A G E 1 0
GRANDVUE 800
INSTALLATION INSTRUCTIONS
TENSION DEVICE INSTALLATION
