TPM-2XLEDEQ-4X3-CPR
BATTERY CLAMPS OR RING TERMINALS
Complete connection to battery
outputting voltage within the fixture's rating,
following all local and national electric
codes,
and
taking precautionary steps for weatherproofing all connections if installed in a location where water may
come in contact with the unit. All outdoor installations and indoor installations near a wet location require the use of a
GFCI device for safety, according to the National Electrical Code® (NEC). Ensure the unit is properly grounded.
CIGARETTE PLUG
Mate cord cap with compatible receptacle outputting voltage within the fixture's rating.
Larson Electronics, LLC
Phone: (877) 348-9680
Fax: (903) 498-3364
www.larsonelectronics.com
2
of
2
THESE INSTRUCTIONS MAY NOT COVER ALL DETAILS OR VARIATIONS OF THIS PRODUCT FOR YOUR EQUIPMENT OR INSTALLATION REQUIREMENTS.
SHOULD FURTHER INFORMATION NOT COVERED BY THESE INSTRUCTIONS BE REQUIRED, PLEASE CONTACT LARSON ELECTRONICS BY EMAIL AT
OR BY PHONE AT
1-877-348-9680
FOR FURTHER ASSISTANCE.
PLEASE VISIT LARSONELECTRONICS.COM FOR
WARRANTY
AND
RETURN
INFORMATION.
MAINTENANCE
There are no serviceable parts inside the fixture. However, it is good practice to routinely clean and check the
fixture for proper function.
•
Disconnect power running to the lamp and be sure the fixture is cool to the touch.
•
Use a non-abrasive glass cleaning solution to clean the lens.
Note: It is not necessary to open the fixture and clean or touch the LED’s.
USE AND CARE
Unauthorized modification may impair the function and/or safety of this device and could affect the life of the equipment.
Always check for damaged or worn out parts before using the device. Store it in a secure place out of the reach of
children when not in use. Inspect for good working condition prior to storage and before re-use.
REPLACEMENT PARTS
The
TPM-2XLEDEQ-4X3-CPR
is designed to provide years of reliable performance. Should the need for replacement
parts arise, please contact Larson Electronics.
