SLEDB-110V-M
Larson Electronics, LLC
Phone: (800) 369-6671
Fax: (903) 498-3364
www.larsonelectronics.com
2
of
2
FLASH TUBE REMOVAL
WARNING:
Risk of Electric Shock. Lamp
MUST
be removed from power source and discharged prior to
performing maintenance!
Flash tube is easily removed by inserting a flat blade screwdriver between socket and tube and prying upward,
working around the base of the tube.
MAINTENANCE
If the lens becomes dirty, wipe down with a mild soap and water solution.
It is recommended to occasionally inspect the unit for any defects and to ensure the cable is not frayed and is
gripping tightly in all points of cable contact.
WARRANTY
These instructions may not cover all details or variations of this product for your equipment or installation requirements.
Should further information not covered by these instructions be required, please contact Larson Electronics at
1-800-369-6671 or email
Please visit larsonelectronics.com for
Warranty
and
Return
information.