Part # SL-ALM
Larson Electronics, LLC
Phone: (800) 369-6671
Fax: (903) 498-3364
www.larsonelectronics.com
2
of
5
Thank you for your purchase of the SL-ALM LED Portable Strobe Light, the following instructions are
intended for this part number only. This light features a fully adjustable magnetic base and is battery
operated, making it extremely portable.
To begin using your LED light, take off the back plate
by unscrewing the two screws and pulling it off.
Once the battery compartment is accessible, place 4
AA batteries in each corresponding spot and replace
the back plate.
Press the yellow button on the right side of the back
of the light to activate it.
Use the tightening adjustment knobs on each side of the light base
to loosen or tighten the pivoting ability of this light.
The light and the base can be separated by pushing down
on the lever at the front of the light base to release the lock
and allowing you to slide the light out.
