Larson Electronics LLC www.LarsonElectronics.com [email protected]
9419 E US HWY 175, Kemp, TX 75143 - P: (800) 369-6671 - F: (903) 498-3364
RSLED
Warning:
To avoid the risk of fire, explosion, or electric shock, this product should be installed, inspected, and
maintained by a qualified electrician only, in accordance with all applicable electrical codes.
To avoid electric shock:
Be certain electrical power is OFF before and during installation and maintenance.
Luminaire must be connected to a wiring system with an equipment-grounding conductor.
Potential Electrostatic Charging Hazard
Avoid electrostatic discharge:
Clean lens with damp cloth only
INSTALLATION
1. Inspect shipping package and contents to ensure no damage has occurred during shipping.
2. Remove Surface/Wall Bracket from the box.
3. Mount Wall Bracket to desired location with two (2) 3/8” bolts to secure the fixture to ceiling
surface. Ensure placement of bolts in X pattern as shown by
A
and
B.
**
Recommended to use four (4) in high wind and vibration environments.
