WIRELESS REMOTE
The wireless remote and the spotlight communi-cate at 2.4GHz.
Please familiarize your-self with the features as shown in Figure 4.
•
Indicator LED’s – When command is given, appropriate LED’s will light to indicate whether the remote is controlling
spotlight #1, spotlight #2 or both.
•
Spotlight Selector – Depress for 5 seconds to toggle between controlling spotlight #1 only,
spotlights #1 and #2 and spotlight #2 only
•
Home – from any position will rotate light to 0° position
•
Lamp On/Off – Turns lamp on and allows directional commands
•
Speed selector – Fast and slow
•
Directional Controls – Rotates and tilts spotlight
Figure 4
– ST Wireless Handheld Remote
Features
PAIRING WIRELESS REMOTE
Each wireless remote has a unique operating code. The camera system is not paired to the remote at the factory and
must be paired by the user before the camera system will respond to the remote. The camera system has a learn
mode for pairing that is initiated for the first six seconds after power is applied.
To pair:
1. Disconnect power from the camera system.
2. Set remote for camera system #1. Depress any directional key to check. The indicator LED for camera system #1
only should be lit when you do this. If not, depress the camera system selector button for five seconds to toggle
to next setting. You may have to do this twice.
3. Press and hold the on/off key + speed selector key on the remote while simultaneously reconnecting power to the
spotlight. After three seconds the lamp will flash three times to confirm the pairing process was successful.
OPTIONAL PAIRING POSSIBILITES:
It is also possible to pair:
•
One remote to control two camera system
•
Two remotes to control one camera system(transmitter replication)
When using one remote to control two camera system, the spotlight selector function allows the user to
control the spotlights inde-pendently or in tandem.
OPERATION OF
THERMAL IMAGING CAMERA SYSTEM
1. Insert the cigarette plug from spotlight into the vehicle 12V DC socket on magnetic mount models. On
permanent mount models connect the power wires to power source.
RCL-336
Larson Electronics, LLC
Phone: (800) 369-6671
Fax: (903) 498-3364
www.larsonelectronics.com
5
of
1
0
