LEDWL-xx-1227
Larson Electronics, LLC
Phone: (800) 369-6671
Fax: (903) 498-3364
www.larsonelectronics.com
2
of
2
LIGHT ADJUSTMENT
The light can adjust left or right, up or down by loosening
the corresponding bolts. Loosen the single tightening
bolt to rotate the light side to side and tighten when
complete. Loosen the adjustment bolt toward the lights
pivot point to move the light up or down and tighten
when complete. Tighten all bolts once desired position is
achieved.
MAINTENANCE
If the lens becomes dirty, wipe down with a mild soap and water solution.
It is recommended to occasionally inspect the unit for any defects and to ensure the cable is not frayed and is
gripping tightly in all points of cable contact.
TROUBLESHOOTING
Refer to the guide below or contact the manufacturer if the fixture does not function properly.
Is the correct line voltage supplied?
Is the line active?
Is the Deutsch connecter properly attached?
Should further information not covered by these instructions be required, please contact Larson Electronics at
1-800-369-6671 for further assistance.
Please visit LarsonElectronics.com for
Warranty
and
Return
information.
TIGHTENING BOLT
ADJUSTMENT BOLT
