Larson Electronics, LLC
Phone: (877) 348-9680
Fax: (903) 498-3364
www.larsonelectronics.com
2
of
6
•
Because vehicle roof construction and driving conditions vary, do not drive a vehicle with a magnetically mounted
warning light installed. The light could fly off the vehicle, causing injury or damage. Repair of damage incurred
because of ignoring this warning shall be the sole responsibility of the user.
•
Locate the light system controls so the VEHICLE and CONTROLS can be operated safely under all driving
conditions.
•
After installation, test the light system to ensure that it is operating properly.
•
Test all vehicle functions, including horn operation, vehicle safety functions, and vehicle light systems to ensure
proper operation. Ensure that the installation has not affected the vehicle operation or changed any vehicle safety
function or circuit.
•
Scratched or dull reflectors or lenses will reduce the effectiveness of the lighting system. Avoid heavy pressure and
use of caustic or petroleum-based products when cleaning the lighting system.
•
Replace any optical components that may have been scratched or crazed during system installation.
•
Do not attempt to activate or deactivate the light system controls while driving in a hazardous situation.
•
You should frequently inspect the light system to ensure that it is operating properly and that it is securely attached
to the vehicle.
•
After installation and testing are complete, provide a copy of these instructions to instructional staff and all operating
personnel.
•
File these instructions in a safe place and refer to them when maintaining and/or reinstalling the product. Failure to
follow all safety precautions and instructions may result in property damage, serious injury, or death.
Nominal Input Voltage
12 Vdc
Input Current
3.0 A
Height
Perm Mt: 7.10 inches (18.0 cm)
Mag mt: 6.94 inches (17.6 cm)
Diameter
Perm Mt: 6.54 inches (16.6 cm)
Mag Mt: 5.19 inches (13.2 cm)
Weight
Perm Mt: 2.4 lb (1.1 kg)
Mag Mt: 2.5 lb (1.1 kg)
Wireless Operating Frequency
2.4 GHz
Qty.
Description
3
#8 Pan Head Phillips Screw
3
#10 Pan Head Phillips Screw
3
1-3/4-inch #10 Machine Screws
3
7/8-inch #10 Machine Screws
3
#10 Machine Nuts
1
Remote
2
AAA Batteries
Contents Table
Specifications Table
Unpacking
After unpacking the search light, inspect it for damage that may have occurred in transit. If there is damage, file a claim
immediately with the carrier, stating the extent of damage. Carefully check all envelopes, shipping labels, and tags before
removing or destroying them. If installing a permanent mounted search light, ensure that the parts listed in the Contents
Table are included in the package.
GL-2051-M
