![background image](http://html1.mh-extra.com/html/larson-electronics/gau-kfa-ph-600k-tst/gau-kfa-ph-600k-tst_instruction-manual_676677009.webp)
Operation (Continued)
LONG-TERM STORAGE OF HEATER
1. Remove drain nut fr9m rear bottom side of fuel tank by un
screwing nut and drain. See Figure 6.
2. Using a small amount of kerosene, swirl and rinse the inside of
the tank.
NEVER MIX WATER WITH KEROSENE, as it will cause rust in
side the tank. Pour the kerosene out, making sure that you remove
it all.
IMPORTANT:
Do not store kerosene over summer for use during
next heating season. Using old fuel may damage heater.
3. Reinstall drain bolt as follows:
i. Insert bolt's seal head fully into drain hole so that flange is
flush to tank's bottom. See Figure 6.
ii. Insert seal cap fully into head hole so that cap flange is flush
to head flange. See Figure 6.
.,
Drain Bolt
(Bottom-Fron
of
Fuel
Tank)
Figure 6. Drain Bolt Reinstall
GAU-KFA-PH-600K-TST
Larson Electronics, LLC
Phone: (800) 369-6671
Fax: (903) 498-3364
www.larsonelectronics.com
9
of
16