Larson Electronics LLC www.LarsonElectronics.com [email protected]
9419 E US HWY 175, Kemp, TX 75143 - P: (800) 369-6671 - F: (903) 498-3364
FUNCTIONS
The EXPRL-91 is operated using a single body switch.
First Press
– Flashlight On
Second Press
– Floodlight On
Third Press
– Dual-Light On
Fourth Press
– All Off
Press and Hold
– Strobe On
Press Again
– Strobe Off
FEATURES
The housing is resistant to most automotive and industrial chemicals. For example: Potassium
hydroxide, hydrochloric acid, sulfuric acid, isopropyl alcohol, Freon, gasoline, kerosene, diesel
fuel, antifreeze, hydraulic fluid and others. Avoid prolonged exposure and clean immediately.
The charging platform and light are electromagnetically compatible with FCC regulations CFR-7,
Part 15, Sub-Part B and Class A.
This flashlight is powered by a Nickel Metal Hydride (NiMH) battery pack and is earth friendly so
it can be disposed of in municipal waste without harm to the environment. (Excluding California)
The EXPRL-91 is water resistant and is not affected by fog, mist or intermittent spray.
CHARGER PLATFORM MOUNTING
Mounting the charger platform requires two #8 screws (not provided).
Use the supplied 12 VDC fused auto adaptor plug for temporary vehicle installations.
For permanent wiring, the installation must be fused using a 3-amp in-line fuse.
The DC input terminal that connects to the base of the charger platform is center-positive.
Installation should be performed by a professional installer.
TIPS TO EXTEND BATTERY LIFE
The battery pack does not have a memory effect. Charging the battery pack often helps extend its useful
life.
A new flashlight or one that has not been used for a long period of time may not accept a full
charge initially. This is normal and does not indicate a problem. Fully discharge and then charge
the unit several times to condition the battery pack for full capacity.
Charge the unit after each use, whether the flashlight is fully discharged or not.
Store the flashlight at room temperature.
